Nano 10G Mono Specifications

Resolution

6144 x 6144 (37.7 Mpx)

Sensor

Teledyne E2V Emerald 37M

Pixel Size

2.5 µm x 2.5 µm

Shutter Type

Full frame electronic global shutter function

Firmware Option

Standard Design Firmware (Default Factory)
12-bit Design Firmware (Field Upgradable Firmware – Contact sales representative)

Full Well Charge

5 ke (max)

Sensitivity to Saturation

1x

Pixel Data Format

Mono 8-bit (Standard & 12-bit Designs)
Mono 12-bit (12-bit Design)
Mono 12-bit packed (12-bit Design)

Maximum Internal Frame Rate (Full Resolution)

18.5 fps (Standard Design)
15.4 fps (12-bit Design)

Maximum Sustained Frame Rate

18.5 fps (Standard Design)
15.4 fps (12-bit Design)

Trigger to Exposure Minimum Delay

10 µs (Standard Design)
14 µs (12-bit Design)

Trigger to Exposure Start Jitter

Up to 1 line time

Actual Exposure Time Minimum (see “exposureTimeActual” in Sensor Control)

14 µs (Standard Design)
21 µs (12-bit Design)

Min. Time from End of Exposure to Start of Next Exposure

101 µs (Standard Design)
125 µs (12-bit Design)

Horizontal Line Time

8.75 µs (Standard Design)
10.50 µs (12-bit Design)

Readout Time

(Horizontal Line Time * NB Lines) in μs

Auto-Brightness

Yes

Black Offset Control

Yes (in DN)

Gain Control

In-sensor Analog Gain (1x to 4x), FPGA Digital Gain

Binning Support

Yes (FPGA, summing or averaging)

White Balance

No

Noise Reduction

Yes

Decimation Support

No

Defective Pixel Replacement

Yes, up to 4096 positions

Image Correction

LUT (2 user-defined sets, Gamma correction)
Lens Shading correction (2 User-defined sets)

Image Flip Support

No

Multi-ROI Support

In-Sensor, up to 16 ROIs (mutually exclusive with binning)

Multi-camera Synchonization

Synchronization via external trigger signal, Action Command or using PTP (IEE1588) modulo

On-board Image Memory

430 MB

Output Dynamic Range

62 dB (@ 10-bit, Standard)
66 dB (@ 12-bit)