IP Configuration Sequence

The IP configuration sequence is executed automatically on camera power-up or when connected to a network in order to assign an IP address to the camera. As a GigE Vision compliant device, Nano 10G attempts to assign an IP address as follows.

For any GigE Vision device, the IP configuration protocol sequence is:

• Persistent IP (if enabled)

• DHCP (if a DHCP server is present such as the Teledyne DHCP server)

• Link-Local Address (LLA) (always enabled as default)

The factory default IP configuration for Nano 10G is Persistent IP disabled and DHCP enabled, with LLA always enabled as per the GigE Vision specification.