GigE Server Verification
After a successful Sapera installation, the GigE Server icon is visible in the desktop taskbar notification area (note that in Windows 7 the icon remains hidden until a camera is connected). After connecting a camera, allow a few seconds for the GigE Server status to update. The Nano 10G camera must be on the same subnet as the NIC to be recognized by the GigE Server.
|
Device Available |
Device IP Error |
Device Not Available |
|
|---|---|---|---|
|
GigE Server Icon |
|
|
|
|
It will take a few seconds for the GigE Server to refresh its state after any change. |
The GigE server icon when the device is found. The camera has obtained an IP address and there are no network issues. |
The GigE server icon shows a warning when a device is connected but there is some type of IP error. |
The GigE server icon shows a red X when the device is not found. This indicates there is an issue preventing communication with the camera, or there is no camera connected. |
If you hover your mouse on this icon, the GigE Server will display the number of GigE Vision devices found by your PC.
©