GigE Vision Host Control Features

The GigE Vision Host controls as shown by CamExpert, has parameters used to configure the host computer system GigE Vision features used for Genie Nano-10G networking management. None of these parameters are stored in any Genie Nano-10G camera.

These features allow optimizing the network configuration for maximum Nano-10G bandwidth. Settings for these parameters are highly dependent on the number of cameras connected to a NIC, the data rate of each camera and the trigger modes used.

Information on these features is found in the Sapera LT Getting Started Manual for GigE Vision® Cameras & 3D Sensors (pdf).